The Best Benchtop Jointer (8inch vs 6inch)

| ,

Whether you’re a hobbyist or a professional carpenter your workshop could benefit from the addition of a jointer. Jointers will straighten wooden boards on all planes, giving them edges at angles from forty-five to ninety degrees and making it possible for you to join the boards effectively.

With a jointer, you can smooth rough edges, rework timber into usable shape and remove imperfections such dings and scrapes.

Whether you choose a benchtop jointer or a closed stand jointer will depend on your requirements. Benchtop jointers tend to be less expensive and lighter but they have smaller tables and can’t manage planks that are more than six inches wide. Closed stand jointers have longer tables. They are heavier and they have a wider bed.

The Best Benchtop Jointer Reviews

In this review we take a look at some of the best jointers on offer right now -6 inches to 8 inches, value jointer to jointers for small shops. You’ll find the best option for you in this review.

Porter Cable 6 Inch Variable Speed Bench Jointer

Porter Cable has earned a reputation as a producer of good quality power tools at a very reasonable price. This six-inch benchtop jointer is a lightweight thirty-five pounds. This machine is advertised as a beginner’s benchtop jointer and it really is easy to operate.

This machine boasts a variable speed motor which makes it very capable of cutting different types of wood from softwoods to hardwoods. By tweaking the variable speed to suit the wood hardness you will achieve a superior finish every time you use the machine. The cutter head can be run at any speed from 6000 rpm to 11000 rpm, landing between 12000 and 22000 cuts per minute. The cutting table is a reasonable thirty inches so you have a fair amount of latitude on wood length.

The cutter head lock makes it safe and easy to change the blades. The fence is center mounted and made of aluminum. Unfortunately, the design is such that it is difficult to square up when it is moved. The fence is equipped with 45⁰and 90⁰stops. The fence is however well mounted and supports the timber properly to ensure a smooth plane with accurate edges.

The four-inch dust port is more than adequate for the job of keeping the area clean. It is certainly bigger than most others on the market.

For the price, this benchtop jointer is excellent value for money. The variable speed control offered by no other product in this price range gives you full control of the cutting speed allowing you to ensure the smoothest and most accurate finish no matter how hard or soft the wood.

This machine is easy enough for beginners to use but is not suited for a professional workshop as the aluminum table may not withstand heavy usage. The table, the cutter heads and the angle of the fence should be checked regularly as this is not a high precision machine.


  • Affordable
  • Lightweight and highly portable
  • Powerful 2HP motor 110-volt 10 amp
  • Variable speed control with the adjustment of an easy to reach lever
  • Easy and safe replacement of knives facilitated by cutter head lock
  • Effective dust collection
  • Three-year warranty


  • The fence design makes adjustment difficult
  • Aluminum table not particularly durable


  • Variable speed motor for working all types of timber
  • 1.4 HP motor
  • 19.75 x 4.25-inch center mounted fence
  • Built-in cutter head lock for easy blade replacement
  • Fence with 45⁰ and 90⁰ stops
  • The two knife cutter head
  • Four-inch dust port
  • Six-inch bed width
  • Thirty-inch table
  • Cut depth 1/8 inches
  • Three-year limited warranty
Check Price on Amazon

JET 6-Inch 1 HP Jointer with Quick-Set Knive System

Jet has been in business since 1958 and sells a wide range of woodworking tools.  

This product is closed stand jointer and is a great beginner’s machine as it is intuitively laid out and is really easy to use. It is one of the most affordable full-size jointers on the market today. It has an all steel base and cast-iron tables. At fifty-five inches the table is longer than most which means of course that it is capable of working longer lengths of timber.

The infeed and outfeed tables are adjusted by using the handwheels mounted on the front of the machine. It has an automatic limiter to prevent inadvertent overcut, but this can be overridden by the operator

The machine is equipped with three cutting blades, which have two cutting edges that effectively double the lifespan of the blades. The Quickspeed blades are made for easy one-piece removal and replacement.

The jointer is capable of six thousand cuts per minute and it is capable of rabbeting, a job it does particularly well. The two-way tilting fence has positive stops at 45⁰and 90⁰. It is very easy to operate with conveniently placed push button controls.

The table is kept clear of chips and dust by an adequate four-inch dust port which is attached to a dust chute.

The base of the machine is fitted with tabs for attachment to the floor. Installation is quick and easy.

This unit is covered by a five-year warranty.


  • The machine has a half inch rabbeting function
  • Three setting knife speed means that the operator has more control for cutting different types of wood
  • Long cast iron table offers superior support
  • Quick set knives for easy changeover
  • Excellent value for money
  • Five-year warranty


  • The small motor makes this unit unsuitable for extensive use


  • 55-inch cast iron table
  • Half inch rabbeting capacity
  • One horsepower motor with industrial grade controls
  • Fence is 33 1/8 “and has both 45⁰and 90⁰ stops
  • Three high-speed blades with two cutting edges and easy changeover
  • Front mounted wheel for adjusting infeed and outfeed tables
  • Four-inch dust port with integrated dust chute
  • Six-inch bed width
  • Half inch cutting depth
  • Five-year warranty
Check Price on Amazon

POWERTEC BJ600 Bench Jointer with Built-In Dust Collection

The Powertec BJ600 is low-cost benchtop jointer, with some great features. You’ll be pretty impressed with the performance of this machine as it delivers smooth and accurate cuts to a wide variety of wood, and it is surprisingly quiet.

The body is solid and durable cast iron that will absorb much of the vibration making for a much more comfortable working experience. The machine weighs in at eighty pounds, so it is a sturdy and substantial machine that won’t move around when you are working on it.

The duel cutter head ensures that the cuts are smooth and accurate. The blades deliver 20 000 cuts per minute, which is why it is so versatile across wood densities. The machine is equipped with a very sturdy cast iron fence and two positive stops at 45⁰and 90⁰. The fence can tilt both inwards and outwards. This feature makes it much easier to make bevel and chamfer cuts.

The product is powered by a twelve-amp motor, using little electricity but managing a powerful 1 ¾ horsepower output. It is equipped with an additional safety feature in the power lock, which when engaged will ensure that it does not accidentally restart.

The dust collection of this product outperforms that of any other low-cost benchtop jointer. This ensures that the cutting blades remain clean and require less maintenance. The large collection bag also reduces maintenance time as it requires less frequent cleaning

The kit comes with all the equipment that you need to get started. It shouldn’t take you more than a few minutes to assemble this machine as most of the parts come pre-assembled. Powertec is an established manufacturer specializing in power tools for the woodworking industry for the last forty years.

This inexpensive machine delivers on its promises.


  • Powerful 1-3/4 HP motor
  • Cast iron infeed and outfeed
  • Fence tilts for bevel cuts
  • Substantial dust collection system


  • The assembly instructions are incomplete and unclear
  • The alignment needs intermittent readjustment


  • Safety power switch lock
  • Cast iron infeed and outfeed table
  • Solid cast iron body
  • 20 000 cuts per minute
  • Large built-in dust collection bag
  • Cast iron fence can move 45⁰either
  • 1 ¾ HP 12 Amp motor
  • 28 ½ inch table
  • Available in both six and eight-inch bed widths
  • 1/8 inch cutting depth
Check Price on Amazon

Cutech 6″ Bench Top Spiral Cutter Head Jointer with Carbide Tips – Best Jointer For Home Shop

Cutech has only been in business since 2015, so they are new-comers who are yet to build up a strong brand following.

This benchtop jointer is an inexpensive product with some nifty features. It weighs just forty pounds so it is highly portable. The body is constructed from heavy duty cast iron, but the tables are aluminum.

Despite its low cost, this product is equipped with a spiral cutter head. This superior cutting arrangement delivers a smoother finish than cutting blades. The aluminum spiral cutter has twelve double-sided carbide inserts for fast and efficient flatting. Only two of the cutters are actually engaged at any one time. When worn the inserts can be turned around and the other side used. They are also easy to replace at a reasonable cost.

The cutter head design makes this the fastest worker amongst bench top joiners. Spiral cutting is also quieter than other methods of cutting, and it produces the smoothest of cuts and the most precise edges. There are not many benchtop jointers that employ spiral cutting so if you seek these benefits then this should make your short list.

The table is a reasonable size, and the fence is easily adjustable offering angles 90⁰to 135⁰for mitering.

Assembly of this machine is really quick and easy and it comes with a detailed manual that will help you every step of the way. You should accomplish the task in about half an hour.

This is a handy little machine for the home carpentry enthusiast. Although this brand is new on the market they do offer great after sales service. The product carries a two-year warranty.


  • Helical spiral cutter head for a superior smooth and precise cut and quiet operation
  • Inexpensive
  • Compact size and lightweight


  • The fence is a bit flimsy
  • Initial adjustment to table levels are a little more difficult than some of the competitive products


  • A powerful 10-amp 120-volt motor
  • Helical spiral cutter head
  • 11000 rpm
  • Adjustable infeed and outfeed tables
  • Thirty-inch table
  • Six-inch bed width
  • 1/8 inch cutting depth
  • 2 1/4 dust port
  • Adjustable spring tension on cutter head guard
  • Includes push blocks and tools for replacing cutter head inserts
  • 2-year warranty
  • Safety lockout
Check Price on Amazon

Delta Power Tools Inch MIDI-Bench Jointer – Best Jointer For Small Shop

Delta has a reputation for producing very reliable power tools. The company has been around for ninety years and will be around to support after sales service for years to come. The Delta 37-071 is one of the best small bench jointers in the business. It is a little more expensive than some of the other bench jointers on the market but it is made from solid cast iron and has been made to last. The solid construction helps to damp down the vibrations from the machine.

The cutting head is able to deliver 20000 cuts per minute ensuring a smooth finish no matter how dense or tough the wood. This product is capable of making very accurate and smooth cuts on all types of wood.

The fence is equipped with positive stops at 45⁰in 45⁰out and 90⁰. It is very easy to change the angle. The jointer has two long straight cutting knives, which are very easy to change, taking just under a minute to replace or adjust the blades.  

The table is a little shorter than some of its competing products. The general rule of thumb is that you can cut planks twice the length of the table but this machine can manage an extra five inches.  

The integrated dust blower keeps the blades clear of chips and sawdust by blowing them into a collection port. The machine is covered by a five-year limited warranty and a ninety-day money back guarantee if you are not completely satisfied with the product.

This is a high-end product suitable for professionals and beginners. Assembling the unit is simple and it should take no more than thirty minutes to do.


  • Built from durable cast iron
  • 1.5 HP motor
  • Strong brand name
  • Five-year limited warranty


  • Fence takes a while to align when positioning is changed


  • 2 straight knives which are easily replaced
  • 20 000 cuts per minute
  • 1 ½ HP motor – 120-volt single phase 12 amp
  • Positive fence stops at 45⁰ in 45⁰out and 90⁰
  • Built-in dust blower to keep the offcuts off the blades
  • 28 ¼” table
  • Fence 22 7/8 “
  • 2 ¼ inch dust chute
  • Six-inch bed width
  • 1/8 inch cutting depth
  • Includes two push blocks
  • Limited five-year warranty
  • Ninety-day money back guarantee
Check Price on Amazon

Shop Fox W1829 Benchtop Jointer, 6-Inch

Shop Fox has been around since the turn of the century and has built a reputable name for producing top quality specialized machines at reasonable prices. This benchtop jointer is a solid cast iron machine weighing in at eighty kilograms. This makes it somewhat more difficult to move but it also gives it solidity and stability. Heavy machines tend to absorb some of the vibrations, allowing for a smoother finish. They also do not move when in operation.

This machine has a cutter head equipped with two knives that offer a smooth and even finish. It is capable of delivering 20000 cuts per minute so you will achieve straight and smooth boards at top speed. The blades are easy to access and replace.

It has an easy to reach knob adjustment for fine tuning the cutting depth. The fence has stops at 45⁰ and 90⁰ and is easily adjustable for angled cuts. It can swing 45⁰in either direction.

The machine is equipped with an impeller blade that blows the offcuts away through an exit hole into a chute which can drop the debris straight into a bin.

Although there have been some reported problems with chipping and infeed and outfeed surfaces not being totally flat this jointer is good value for money. It works fast and efficiently and the HSS knives ensure a smooth finish is rapidly achieved.

Machine assembly can be a problem because the manual is not very well written and contains some errors so check the Internet first to save yourself the frustration.

This is a versatile machine at an excellent price. It comes with a pair of push blocks and has a two-year warranty.


  • Inexpensive
  • Cast iron construction
  • Fence and depth is easily adjustable
  • Smooth and efficient operation


  • Occasionally chips wood
  • The manual is not well written nor is it comprehensive


  • 1 ½ HP single phase motor 110 volts 12-amp single phase
  • The two blade cutter head runs a 10 000 rpm
  • Performance speed of 20 000 cuts per minute
  • Manage cutting depth arrangement with nifty adjustment knob
  • Adjustable fence and cutting depth with stops at 45⁰ and 90⁰
  • Impeller blows offcuts away from the blade
  • 2 ½ inch dust port
  • Six-inch bed width
  • 28 ½ inch table
  • Two push blocks
  • Two-year warranty
Check Price on Amazon

Powermatic 6-Inch Jointer with helical cutter head

Powermatic is a brand recognized by many as one that impresses with quality products every time. The weight and design of this high-quality full-size jointer allow it to absorb much of the vibration of the process, helping it to produce a smoother finish.

The machine is equipped with a helical cutter head with four indexable carbide cutter blades. The design of cutter head provides quiet and polished performance. Helical cutter heads are surprisingly quiet in operation and can cut wood of any density to a smooth and glossy finish.

The jointer is powered by a one horsepower motor that has been mounted in a way that allows for easy access to the belt. The 66-inch table is one of the longest available so it can cut longer lengths of timber. Adjust the outfeed table with the handwheel below the table. Adjustments to the infeed table are also easily made and are fine and accurate.  

The cast iron fence has a tilt and support mechanism that allows you to tilt the table 45⁰towards or away from the table for a more precise finish. At 38 inches it is a lot longer than the industry average. There are fully adjustable 45⁰and 90⁰stops included in the kit.

The jointer has a dust collection channel under the cutter head that leads to a four-inch port. The base of the machine contains the dust collection system, a neat arrangement that keeps the pipes off the floor.

The product comes with two magnetic push blocks. The jointer is fairly easy to assemble, and the instruction manual is well written and comprehensive. Some assistance will be necessary to lift the bed onto the base as it is very heavy.

This top rated benchtop jointers is made from quality components and once installed and set up the settings will remain accurate with no need for frequent calibration.


  • Solid construction won’t move when in operation
  • Helical cutter heads are quiet and efficient, cutting smoothly and accurately
  • Easy to use fence system
  • Long table supports longer stock


  • One horsepower motor


  • 1 HP motor
  • Helical cutter head with four machined carbide inserts
  • Six-inch bed width
  • Lever for fine control of adjustable infeed table
  • Centre mounted fence controls
  • Fence able to tilt 45⁰either way for angled cuts
  • Includes fully adjustable 45⁰and 90⁰stops
  • Four-inch porthole is connected to a chute
  • 66-inch table
  • 38-inch fence
Check Price on Amazon

Powermatic 8-Inch 2 HP 1-Phase Jointer with Helical Cutter head

This heavy-duty closed stand jointer can handle large volumes of work. It is both efficient and reliable and the helical knives cut any type of wood to a smooth and accurate finish. The helical cutters have two insert cutter blades. Helical cutters are much quieter in operation than cutting knives, and they produce a smoother more precise finish.

This is a top end machine with a price to match. This product is recognized as one of the best eight-inch bed width jointers on the market. It boasts a very long table at 73 inches and the fence is 38 inches so it cuts timber lengths that other machines cannot.

This machine has powerful two horsepower motor. It has an easily adjustable infeed with an adjustment lever with fine and coarse settings that you use to accurately determine the depth. The fence is also easily adjustable. Simply turn the hand wheel and the worm gear will do the job for you. A non-marring insert prevents scratches on the table when the fence is adjusted.

All adjustments stay firmly in place and you should not have to check the angles and depths since the cutter head, fence and table will not budge. The cutter heads rotate seven thousand times per minute.

This machine has an excellent dust removal system that will eliminate virtually all dust and chips from the table.

The initial assembly takes a while but is easily achieved and once completed the parts remain in place and will not require re-alignment.

The product comes with two magnetic push blocks. It is covered by a five-year warranty.

If you do a lot of wood straightening and need a jointer to do the job quickly and dependably over extended periods then this is the machine for you. It will grind and polish any wood to a glossy finish.


  • Solid and durable cast iron construction
  • Choice of four-sided helical or three knife cutter head
  • Quiet and efficient cutting with precise finishes
  • Easy infeed adjustment
  • Extra-long table
  • Powerful 2HP motor


  • Expensive
  • Only available in 240 volts


  • 2HP Heavy duty motor
  • Cast iron body
  • Choice of three side knives or four-sided helical cutter head
  • 73” table
  • 38” fence
  • Fence adjusts using a hand wheel
  • Non-marring inserts to prevent table scratches
  • Ergonomically placed mount switch
  • Large 8-inch bed width
  • Half inch cutting depth
  • Five-year warranty
Check Price on Amazon

WEN 10-Amp 6-Inch Benchtop Jointer with Filter Bag

The WEN 6560 is another low-cost benchtop jointer that punches above its price range. Made of solid cast iron and weighing in at eighty pounds this heavy machine is both durable and solid. It certainly won’t wobble or move when you’re working on it and you’re not likely to knock it over. It is however still possible to move it from place to place without requiring assistance.

The cutter head houses a two-blade system that delivers 20000 cuts per minute and produces a smooth and accurate finish. This machine will handle any kind of wood whatever the density. The spring-loaded blade guard ensures that the blade remains covered when not in use.

It has a solid cast iron center mounted fence that can be tilted 45⁰ in either direction for angled cuts. The machine is equipped with a twelve-amp motor.

The table is constructed of top quality polished granite which allows the board to slide smoothly through the feed. The depth of the feed is easily adjusted by a front mounted and very responsive adjustment knob. The adjustment from 0 to 1/10 of an inch allows you to control the amount of material that is removed.

The machine has a two-inch dust port and a blower that cleans the cutting blade area and deposits the waste into the accompanying bag. It has base holes so you can attach it to the working surface in your workshop. The kit includes a push stick and a push block. Assembly is easy and it shouldn’t take much more than about half an hour.

WEN has been in business for several decades and specialize in the manufacture of power tools. They are based in the United States, and will dispatch technicians to assist with repairs should you require it. Their help desk is available a twenty-four seven. This product is covered by a two-year warranty.


  • Inexpensive
  • Solid cast iron construction absorbs vibration and won’t move or wobble
  • Well-known brand that offers excellent customer service


  • The fence is not easy to adjust


  • Two blade system with a standard cutter head
  • 20 000 cuts per minute
  • Adjustable infeed
  • Adjustable fence that can be tilted to 45⁰
  • Spring loaded blade guard
  • Blower with two-inch dust port
  • Dust bag for waste collection
  • 28 ½” table
  • Six-inch bed width
  • 1/8 inch cutting depth
  • Two-year warranty
Check Price on Amazon

Which is the right machine for your workshop?

The choice of jointers is vast, and the one that you select should be determined by your budget, the amount of woodworking that you do, how much space you have, whether you want a portable machine and the size of the stock that you cut.

Some machines have additional features and that will also require your consideration. Whatever your choice, your workshop will benefit from the addition of a benchtop jointer.


Best Koi Food On The Market

Best Automatic Fish Feeder For Koi Pond


Leave a Comment